<p>Hey so I just looked at the advising handbook for warren college, and they had a section in it that said the grades for UCSD, like
A+ = 4pts,
A = 4pts,
A- = 3.7pts,
B+ = 3.3pts, and so on.</p>
<p>Why do they do this? i thought an A would be 4 pts, B is 3 pts, C is 2 pts, and etc. is this the way colleges/UC's grade their stuff? so the (+/-)'s actually matter when determining our GPA?</p>
<p>dont worry, every college does this and even some high schools, so just be happy you didnt have to go there. If you are anything like me most of your A’s are actually A-'s</p>
<p>this grading system applies to all UCs/CSUs i believe and some privates too.</p>
<p>The grading system is actually quite reasonable. For example, if you are an engineering student and you score a 92/100 on an Exam due to an error of forgetting an extra “0” or miscalculation, this can reflect dramatically back in the real world situations. If as an engineer, you perform with the same level competence as you did in your college final exams, you could potentially impair the design of a newly constructed building. There goes a $200 million project!! and maybe thousands of lives!!</p>
<p>The Oil Spill in the Gulf Coast by BP is an excellent example of a current event caused by the miscalculations/inaccurate analysis of engineers.</p>
<p>Actually, it is not uncommon at all to come across professors that will only give solid A’s, B’s, C’s. It’s nice when you make the cut for the A but sorta sucks if you just missed it because then it’s a solid B…so then you look the same on paper as the guy who JUST beat the average in the class. </p>
<p>FYI, all of the upper division bio courses I took so far only gave solid letter grades. One of which actually gave Solids and +'s only which was BOMB! The scale was like 97+ was an A+, 90-96.9 = A, 87-89.9=B+, 80-86.9=B, and so on. </p>
<p>Pick and choose professors wisely, or at least dig up enough dirt to know which ones give more A-'s or more solid A’s etc.</p>
<p>I would recommend it if you didn’t have anything else to take. Did you finish Chem6, Math and BILD? Usually freshmen try to get those done before doing physics. About 90+% of students in the physics1 series are 2nd/3rd years. What’s your situation?</p>
<p>I generally did the same as you did for fall quarter. I also didn’t need to take BILD</p>
<p>I took Math20A, Chem 6A, DOC1 (marshall writing), and a GE. </p>
<p>It’s a good schedule to start off with. I personally did the physics1 series in my 2nd year. It looks like you’re a bit ahead on math, though. If you want you could start the physics series next quarter if it works out since your math will be done.</p>